Sooo Simple to use!

"1 Step Gel" may be the only gel you need.
"1 Step Gel" will apply over professional tips, over the natural nail, or use over your traditional acrylics for shine & stain prevention. Apply over artwork to prevent scratching and peeling.

1. Etch the nail properly with a 100 grit file & sanitize.
2. Put a very small drop of "1 Step Gel" on the nail plate.
3. Using a #2 Brush work the small drop of gel into the etch marks, cuticle to free edge (wrap the free edge), and side wall to sidewall.
4. Then add just enough "1 Step Gel" to create a nice arch. Your "1 Step Gel" will flow to the edges of the nail. (if it does not flow to the edge, either the nail there is dry or you will need a little more gel, too much gel may flow too far!)
5. Flip the hand upside down for about 15 seconds. When you turn the hand back up you should find a very nice arch.
6. Clean any gel you may have applied to the cuticles, and place under a 9 watt Ultraviolet nail curing lamp for no less than 3 minutes.
7. Clean th surface of the gel with alcohol or non-acetone polish remover.

Now you should have a beautiful, shiny, nicely shaped nail.

To do full sets you will need some practice. Nailogic advises practicing on just one nail at a time until you are comfortable with the amount of gel and the shape you need. Eventually, you will do thumbs first, then four and four until finished.

You will love this gel!

Quick, and EEEEasy!

Return to Home Page